Click on your Model

Main Bearing Selection, 40hp-1600cc Motors

To use our bearing chart

  • Determine your engine case main bearing diameter. If you have your old bearings you can measure these. If the case is needing a line bore check with your machine shop to see how much will be cut.
  • Measure the crankshaft bearing journal size to determine the correct ID Again if the crankshaft requires machining you will want to check with the machine shop to determine what the final size will be.
  • Thrust size. The bearings listed in the chart below will vary. Please call to determine what size thrust we may have in stock.
  • Select the correct OD from the top row. Select the correct ID from the left column. The correct bearing set will be where the two rows intersect.
 
Standard
65mm OD
1st Over
65.50mm
OD
2nd Over
66.00mm
OD
Standard
55.00mm
1st
54.75mm I.D.
2nd
54.50mm ID
3rd
54.25mm ID